axle load scale ALW-2 (two-part)

Two-part, very robust axle load scale for above-ground and below-ground operation. Suitable for static and dynamic weighing, so that you can drive slowly over the weighbridge without stopping.

Available in 2 sizes: weighing surface 800x800mm or 1200x800mm

We recommend installing the 2 platforms at ground level, ideally in a mounting frame. (Please inquire separately, but you can also make one yourself.) Above-ground operation is possible with ramps and compensation elements. (Not included in delivery, please order separately.)

Technical data

• Maximum load capacity 15000kg
• Readability 5kg or 10kg
• 4 built-in load cells per platform made of stainless steel (protection class IP67)
• Connection box WWB-4A made of aluminum (protection class IP67) per platform
• Material galvanized steel
• Connection cables between weighing bridges and evaluation device available in different lengths
• WWA-1 evaluation device with ALW program for automatically adding the axle weights and calculating the total weight. With super bright, white, self-illuminating LED matrix display (brightness adjustable in 10 levels), excellent readability, 30mm digit height, 5 digits, IP66/IP68 plastic housing (L x W x H) 191 x 68 x 60mm

Optional accessories

• ramps
• Printer
• remote display including traffic light function
• Internal data logger for storing the weighings as a CSV file on a USB stick
• Software WWS-F
• remote control for vehicle assignment
• Remote control for selecting strokes, vehicles, articles, etc. (only with WWS-F software)
• network camera (only with WWS-F software)

weighing process

DYNAMIC

Drive over the weighing bridge at low speed. The evaluation device determines the axle weights one after the other and displays them briefly. If no axle is determined within a set time, the evaluation device displays the total weight. Depending on the accessories, the weighing is printed, saved or sent to the PC. A connected remote display with traffic light function shows the weights and signals if the vehicle is being driven over too quickly.

STATIC

Drive the first axle onto the weighing bridge and stop briefly. The weight of the 1st axle is recorded and displayed. Drive the 2nd axle onto the bridge and stop. The weight of the 2nd axle is recorded and displayed. Repeat the process with each additional axle. If no more axles are detected within a set time, the evaluation device displays the total weight. Depending on the accessories, the weighing is printed, saved or sent to the PC. A connected remote display with traffic light function shows the weights and signals when an axle has been detected.