Load cell RC3-TS 30.40t
RC3-TS Load Cell – High-performance load cell for vehicle scales
The RC3-TS load cell is an extremely robust and precise force measurement unit for demanding applications in the field of vehicle scales and industrial weighing systems. Thanks to its stainless steel construction and hermetically sealed encapsulation, it meets the highest requirements for durability, weather resistance, and reliability – even under extreme operating conditions.
With an IP68/IP69K protection rating, the RC3-TS is dust-tight, water-resistant, and can be permanently submerged up to two meters deep and cleaned with high-pressure jets. The self-centering force introduction enables precise weight measurement while simultaneously reducing measurement errors caused by lateral forces or misalignment.
|
Nominal load in kg (Emax) |
30000-40000 |
|
Accuracy class according to OIML R 60 |
C3 / C3 MI7 |
|
Number of load cell verification intervals (nLC) |
3000 |
|
Rated output (Cn) / Output tolerance |
2mV/V +/-0.1% |
|
Minimum dead load (Emin) |
0kg |
|
Ratio of minimum LC verification interval (Y = Emax / vmin) |
15000 |
|
Safe load limit (EL) |
200% |
|
Breaking load (Ed) |
300% |
|
Recommended supply voltage (Uref) |
5 – 15V |
|
Zero balance |
+/-2% |
|
Input resistance (RLC) |
1150Ω +/-50Ω |
|
Output resistance (RO) |
1000Ω +/-2Ω |
|
Insulation resistance |
>5000MΩ |
|
Cable length |
18m |
|
Compensated temperature range (BT) |
-10 to +40 °C |
|
Protection class according to (EN 60529) |
IP68 (submersible up to 2 meters) IP69K |
|
Material |
Stainless steel |