RFID Reader WWR-3

Convenient and automated identification of users and vehicles
Delivery time 2-5 business days

WWR-3 RFID Reader for Scales and Truck Scales

The WWR-3 RFID reader enables convenient and automated identification of users and vehicles at scales and truck scales. The RFID reader is particularly suitable for automated weighing processes where vehicles or operators need to be detected quickly and reliably.

The RFID reader operates according to the ISO14443 standard at 13.56 MHz. Both RFID chips as key fobs and RFID access cards can be used for identification. For example, once the stored chip number is detected, a weighing process can be started automatically.

RFID Access Control for Scales

The WWR-3 can be connected directly to a suitable scale indicator or to a PC with the WWS-F truck scale software. This enables RFID-based weighing processes and allows vehicles to be uniquely assigned to a stored data record.

The RS-485 interface with Modbus RTU allows multiple RFID readers to be used in parallel within a system. Alternatively, an RS-232 interface is available.

When used with the WWS-F truck scale software, an RFID chip can be registered in the system once. To do this, the chip is held against the reader and then confirmed on the PC. The chip number can then be assigned to a specific vehicle.

Subsequently, simply hold the RFID card or RFID chip against the reader to detect the stored vehicle and trigger the configured weighing process.

Example of an automated weighing process

  1. Hold the RFID card or RFID chip against the reader.

  2. The chip number is detected by the RFID reader.

  3. The assigned vehicle is identified in the software.

  4. The configured weighing process is triggered automatically.

  5. Status and operating messages are displayed on the integrated display.

In the WWS-F truck scale software, it can be determined whether, for example, an initial weighing followed by a second weighing is performed or whether a stored empty weight for the vehicle is used.

This makes the WWR-3 particularly suitable for automated truck scales, where recurring weighing processes are to be carried out without manual entry of vehicle data.

Display for status and operating messages

The integrated 2-line display with 48 × 16 pixels can display messages about the current process. For example, the user can be informed that an RFID number has been detected or that a weighing process has been carried out.

Depending on the configuration, the weight can be displayed permanently on the display. Alternatively, the weight display can be configured so that the weight is only displayed after successful RFID detection.

Zeroing via RFID reader

With compatible indicators and together with the WWS-F software, the scale can also be zeroed via the WWR-3 RFID reader. 

Technical data

  • RFID standard: ISO14443

  • Frequency: 13.56 MHz

  • Use of RFID chips as key fobs

  • Use of RFID access cards

  • Interface: RS-485 / Modbus RTU

  • Interface: RS-232

  • Multiple RFID readers can be connected in parallel via Modbus RTU

  • Supply voltage: 12–24 V DC

  • Display: 2-line, 48 × 16 pixels

  • Housing protection: IP65

  • Dimensions: 191 × 68 × 60 mm

  • Connection to compatible scale indicators

  • Connection to a PC with WWS-F truck scale software

  • Zeroing the scale via RFID is possible, depending on the indicator

The IP65 plastic housing protects the RFID reader from dust and low-pressure water jets and enables reliable operation in environments with scales, truck scales, and industrial weighing systems.

RFID reader for automated weighing systems

The WWR-3 RFID reader is a practical solution for RFID identification at scales and truck scales. The combination of RFID detection, a display, and various interfaces allows the reader to be flexibly integrated into existing weighing technology and scale systems.

Especially in combination with the WWS-F truck scale software, the RFID reader enables convenient vehicle identification and automatic triggering of weighing processes. This simplifies recurring processes at truck scales and reduces the manual entry of vehicle data.