axle load scale ALW-1 (one-piece)
One-piece, very robust axle load scale for underfloor installation. Suitable for static and dynamic weighing, so that you can drive slowly over the weighbridge without stopping.
Fully assembled unit including protective border, which also serves as a pit frame (lost formwork). The scale is delivered completely ready for use.
Technical data
- Maximum load capacity 20000kg
- Readability 5kg or 10kg
- 4 built-in stainless steel load cells (protection class IP67)
- Connection box WWB-4A made of aluminum (protection class IP67)
- Material galvanized steel
- Dimensions weighing surface 3500mm (width) x 800mm (length)
- Dimensions of total scale including mounting frame 3730mm (width) x 1030mm (length)
- Installation depth of the scale approx. 300mm, plus base plate
- 5 meter cable between weighing bridge and evaluation device
- WWA-1 evaluation device with ALW program for automatically adding the axle weights and calculating the total weight. With super bright, white, self-illuminating LED matrix display (brightness adjustable in 10 levels), excellent readability, 30mm digit height, 5 digits, IP66/IP68 plastic housing (L x W x H) 191 x 68 x 60mm
Optional accessories
- Printer
- remote display including traffic light function
- Internal data logger for storing the weighings as a CSV file on a USB stick
- Software WWS-F
- remote control for vehicle assignment
- Remote control for selecting strokes, vehicles, articles, etc. (only with WWS-F software)
- network camera (only with WWS-F software)
weighing process
DYNAMIC
Drive over the weighing bridge at low speed. The evaluation device determines the axle weights one after the other and displays them briefly. If no axle is determined within a set time, the evaluation device displays the total weight. Depending on the accessories, the weighing is printed, saved or sent to the PC. A connected remote display with traffic light function shows the weights and signals if the vehicle is being driven over too quickly.
STATIC
Drive the first axle onto the weighing bridge and stop briefly. The weight of the 1st axle is recorded and displayed. Drive the 2nd axle onto the bridge and stop. The weight of the 2nd axle is recorded and displayed. Repeat the process with each additional axle. If no more axles are detected within a set time, the evaluation device displays the total weight. Depending on the accessories, the weighing is printed, saved or sent to the PC. A connected remote display with traffic light function shows the weights and signals when an axle has been detected.
