The scale consists of a main platform and a secondary platform that is attached. The main platform can also be operated on its own.
Two sizes are available: 1800 x 900mm or 2000 x 1000mm. Optionally available with a stand for the indicator and/or with a wireless connection between the indicator and the weighbridge.
- Maximum weighing range up to 1200kg in 1kg increments (switchable to 500g)
- Platforms made entirely of aluminum, the peripheral frame construction is made of 50mm square aluminum tubing.
- The platforms are recessed for inserting rubber mats (included in the scope of delivery)
- The peripheral frame is covered with anti-slip tape to prevent the aluminum from "flashing." Unfortunately, this tape has limited durability, especially with horseshoes, but it can be replaced.
- Main platform approx. 900x800mm or 1000x1000mm with 4 load cells, secondary platform approx. 900x800mm or 1000x1000mm with 2 load cells
- High-quality TA-1 550kg stainless steel weighing elements, hermetically sealed, verifiable C3/C4, protection class IP69K
- Cable length from the main platform to the display is 9m, high-quality special connection cable with a 5-pin plastic plug; the first 3m from the platform to the indicator are protected against mechanical damage with a special hose
- Optionally available with wireless transmission between the indicator and the weighbridge
- Overall dimensions LxWxH approx. 1800x800x80mm or 2000x1000x80mm
- Total weight approx. 44kg (PW2-18) or 48kg (PW2-20), base platform approx. 23kg (PW2-18) or 25kg (PW2-20), extension platform approx. 21kg (PW2-18) or 23kg (PW2-20) plus the 2 rubber mats, approx. 10kg each
- Indicator with lithium iron phosphate battery (up to 36 hours of operating time depending on the set brightness)
Further information can be found HERE.